Proximity Mirror

A fixed wide angle Mirror that allows the driver to look at the immediate proximity of the right hand traction tyre. It is mounted on the same support as the normal mirrors.

Handheld Light in cabine

Mounted on the UCM cover on the right hand side of the seat.

Cabine Printer

Used to print all sub-menu information.

Cup Holder

Double cup holder, clicks onto the display sliding rail

Moisture Sensor

Fitted on the grain elevator to check the grain moisture.

Grain Flow Sensor

Can be installed together with the moisture sensor to measure mass flow.

Camera Kit

The camera can be mounted where ever required around the machine with the harness connecting to the right hand side console.Up to 3 cameras can be connected. The operator will be able to select between the camera inputs and the run screens. Each camera input will be displayed over the full screen.

Heated Floor mat

To keep feet warm during cold harvest days,an optional heated floor mat can be installed on the cab floor. The floor mat can be plugged into the 12V socket on the left side of the operator seat and easily been turned on or off with a switch on the harness.The heated floor mat provides electric heating power in a dedicated surface area around the operator’s feet.

Hand Cleaning Station

The Hand Wash Station consists of a water tank with tap. The station is easily accessed from the left side of the machine, near the cab access ladder.

Grainpan Side Slope

When harvesting on slopes, Grain Pan Floating Divider scan be installed on the Grain Pan to avoid overloading the sides of the cleaning shoe. These Dividers can remain installed for all crops.

Unloading Auger Down to Spout

The Chute will add approximately 0.9m (3ft) to the effective unloading length when compared to the original “down” Spout. To ensure the Chute is vertical when in the fully forward position for unloading,it is positioned at an angle of 13.5° when in the transport cradle.